Why can`t i see all my connected Video cards

First off if you have this problem you have to make sure that your motherboard bios supports and you must selecte PCI-Express Generation 2 (Gen2) as default for all PCI-E slots. Motherboards with only Generation 1 PCI-E may or may not work depending on the video card manufacturer.  If you have setup Generation 2 PC-E then make sure all risers are not damaged at all, check the 1x PCI-E connector from all your risers as well. Make sure all your components are powered on correctly and that your PSU has enough power on the PCI-E rail for all the connected componenets.



Related Questions


To bring the cards to a stable overclock, it is important that they are part of the same model if the cards are from AMD.


1. You can start by blocking the cards from mining and leaving only one to make the overclock settings, until it is stable.

- Once stable, make the same changes for the rest of the cards, and unblock them from mining. -


2. Start the rig with one card. Make the overclock settings until stable.

- Once stable, add the rest of the cards, making the same OC settings as the first card. -


To learn about the interface buttons see here


Read more...


This is the revision number of a certain component, specifically video cards have different revision numbers when they are produced and thus some small settings may differ from one rev to another and small performance differences. Although some of these revisions have differences between them, it will not be a huge impact on the component performance.

Read more...


If you do not get any video output after the initial BIOS splash, go to bios settings and set the motherboard to use ONBOARD VIDEO
Now you will also have output on the motherboard video output, so do not forget to plug your monitor into that port

Read more...



Action

Option

Disable

Deep State S3, S4

Disable

Fast Boot (If you are booting from an USB)

Disable

Intel Virtualization

Enable

Above 4G Decoding (If you get a Black Screen, Disable it)

Enable

Internal Graphics

Enable

Legacy mode in BIOS

Enable

CSM Support

Primary Video

Integrated Graphics (Onboard)

PCI-e SpeedGen 2, Gen 3 (If you are using 1070ti-1080ti cards) 


Read more...




This is how you define a pool for mining on Nanopool.org:

- Add the name you are going to mine (ETH Nanopool);

- Choose the algorithm you are going to use (ethash);

- Add your wallet address;

- Add the hostname of the pool (eth-eu1.nanopool.org);

- Add the port (9999);

- Choose the protocol (stratum+tcp);

Add a password only if the pool requires it. On Nanopool.org you do not need a password.

- Click Add New Pool. 


Using the steps above, you can define pools for other coins too. Example SiaCoin.


This is how you add a pool if you are mining on Suprnova.cc:

- Add the name of your pool (Decred Suprnova);

- Choose the algorithm (blacke14r);

- Add the username you signed up on surpnova.cc followed by a random word, or the coin you are mining, in our case Decred (Adrian_D2705.Decred) That will be the name of our worker.;

- Add the hostname (eth.suprnova.cc);

- Add the port (3252);

- Choose the protocol (stratum+tcp);

- Click on Add New Pool.


In the Menu panel, select Dual Mining option. There you can pick what algorithm (coin) can be mined in dual mining. 

As you can see there are:

-Decred;

-lbry coin;

Sia Coin.

Once picked, you will see 2 hashrates on the GPUs.


For mining Ethereum and Decred, you need to create an account on Suprnova.cc

Once created you will add the username in your wallet section in the pool defining seen above.

On the suprnova.cc account, in the My account menu, you will add your worker.

(In my example Decred and password: x ).


After adding the worker, or workers, it should look like this.

The coins that can mined along with Ethereum or Ethereum Classic are:

-Decred;

-SiaCoin;

-Lbry;

-Pascal;

-PascalLite.

Read more...


A rig can disappear only in 2 scenarios:

  1. you have manually deleted it from the list
  2. the rig was not found online for the past 30 days in which case it gets pruned by the system

Read more...


The speed that you see in the rigs table is the one reported by the miner and it may not be the same speed that you see on the pool because of different pool implementations.

Read more...


We will be posting all future updates on our Facebook page and our Blog. Also be sure to check our Youtube Channel for video tutorials and more complex details and setups.

Read more...


If you have not opted for a prepaid solution in favor of a fee based one you are probably asking how is the fee calculated.
The answer is very simple, every 24h the system will choose random from your components and will mine the equivalent time with your package % fee. The process is totally random and automatic. Depending on the amount of components you can see one or more components fee mining at any giving time.
Every 24h cycle all the components will be chosen for mining

Read more...


You can find the Logs feature in the History & Logging menu.


You can check your rigs logs and see what changes were made.



Also if you forget recent settings made to your rigs, you can now revise them in the logs section.

Read more...


Main View Rig Buttons


It shows the current temperature state of one ore more components. If it turns red, one or more components are overheated.


This button shows if the rig is up to date. It will turn red if there is a pending update.


It presents the state of the rigs drive. It will turn red, and it will display a message (on mouseover), That "There is not enough space, and should consider upgrading". If this appears on your rig, it means that you should use a bigger drive for the Operating System. (Using a 32GB+ drive is Recommended). 


It shows if the OS files are in working order. If there is an issue with the OS, it will turn red. For this, it is recommended to format and rewrite the OS on the drive.


It presents the state of the RAM memory (Swap OK). If it turns red, it will display a message (on mouseover), that "The rig is swapping, and consider adding more RAM". Using 4GB+ of RAM is recommended, depending on the GPU count.


This is for rebooting your rig remotely. Also there is an option in the Setting Menu, that activated will Automatically Reboot  your rig for you, if it detects a problem. 


Clicking this, will display the status of your rig, if it has errors or not. 


It lets you know  if you are Dual Mining or not. If you press it, it will turn red, and you will block Dual Mining for your current rig.

Also you can block Dual mining on separate components, of your rig, without the need of blocking Dual Mining for your entire rig.


By clicking this you either allow your rig to get updates, or block it from getting updates, just by a simple click.


Pressing this, DELETES a rig from your account.

Component buttons


The red "Core Speed" button shows the current frequency speed of you core. You can manipulate the Overclock or Downclock of the core, just by clicking and sliding it up or down.


Same goes for the "Memory Speed" button. It show the current frequency of the memory, and you can manipulate it as you wish.


With this button you can decrease the Power Consumption of your GPUs, just by clicking it, and sliding it up or down.


This button allows you to undervolt your GPU. It is only available for AMD GPUs.


You can increase or decrease the GPUs fan speed.


It presents the temperature of the GPU. It turns red if it overheats.


You can enable or disable Dual Mining for a GPU.


The "Miner Output" button, shows you Live and a more detailed view of your GPU output. (ex: Speed, Temperature, Fan, Total Shares, Accepted or rejected shares, DAG Epoch, Pool Diff, etc).


You can block or unblock your GPU or CPU from mining.


Overclock Profile. You can create an overclock profile for a specific rig, or for more rigs. The OC Profile will be automatically added to the specific rig or rigs, or to the rigs that share the same GPU vendor or model.



It appears only if a component is faulty. It also shows up on the component.


Rig Information. By clicking this button, you will be shown all of the info/specs of the mining rig.


It will turn red if there are miner updates. It is an automatic process, it doesn't need any exterior actions to be taken.


Read more...