Blank screen, no video output

If you do not get any video output after the initial BIOS splash, go to bios settings and set the motherboard to use ONBOARD VIDEO
Now you will also have output on the motherboard video output, so do not forget to plug your monitor into that port



Related Questions


Main View Rig Buttons


It shows the current temperature state of one ore more components. If it turns red, one or more components are overheated.


This button shows if the rig is up to date. It will turn red if there is a pending update.


It presents the state of the rigs drive. It will turn red, and it will display a message (on mouseover), That "There is not enough space, and should consider upgrading". If this appears on your rig, it means that you should use a bigger drive for the Operating System. (Using a 32GB+ drive is Recommended). 


It shows if the OS files are in working order. If there is an issue with the OS, it will turn red. For this, it is recommended to format and rewrite the OS on the drive.


It presents the state of the RAM memory (Swap OK). If it turns red, it will display a message (on mouseover), that "The rig is swapping, and consider adding more RAM". Using 4GB+ of RAM is recommended, depending on the GPU count.


This is for rebooting your rig remotely. Also there is an option in the Setting Menu, that activated will Automatically Reboot  your rig for you, if it detects a problem. 


Clicking this, will display the status of your rig, if it has errors or not. 


It lets you know  if you are Dual Mining or not. If you press it, it will turn red, and you will block Dual Mining for your current rig.

Also you can block Dual mining on separate components, of your rig, without the need of blocking Dual Mining for your entire rig.


By clicking this you either allow your rig to get updates, or block it from getting updates, just by a simple click.


Pressing this, DELETES a rig from your account.

Component buttons


The red "Core Speed" button shows the current frequency speed of you core. You can manipulate the Overclock or Downclock of the core, just by clicking and sliding it up or down.


Same goes for the "Memory Speed" button. It show the current frequency of the memory, and you can manipulate it as you wish.


With this button you can decrease the Power Consumption of your GPUs, just by clicking it, and sliding it up or down.


This button allows you to undervolt your GPU. It is only available for AMD GPUs.


You can increase or decrease the GPUs fan speed.


It presents the temperature of the GPU. It turns red if it overheats.


You can enable or disable Dual Mining for a GPU.


The "Miner Output" button, shows you Live and a more detailed view of your GPU output. (ex: Speed, Temperature, Fan, Total Shares, Accepted or rejected shares, DAG Epoch, Pool Diff, etc).


You can block or unblock your GPU or CPU from mining.


Overclock Profile. You can create an overclock profile for a specific rig, or for more rigs. The OC Profile will be automatically added to the specific rig or rigs, or to the rigs that share the same GPU vendor or model.



It appears only if a component is faulty. It also shows up on the component.


Rig Information. By clicking this button, you will be shown all of the info/specs of the mining rig.


It will turn red if there are miner updates. It is an automatic process, it doesn't need any exterior actions to be taken.


Read more...



Action

Option

Disable

Deep State S3, S4

Disable

Fast Boot (If you are booting from an USB)

Disable

Intel Virtualization

Enable

Above 4G Decoding (If you get a Black Screen, Disable it)

Enable

Internal Graphics

Enable

Legacy mode in BIOS

Enable

CSM Support

Primary Video

Integrated Graphics (Onboard)

PCI-e SpeedGen 2, Gen 3 (If you are using 1070ti-1080ti cards) 


Read more...


First off if you have this problem you have to make sure that your motherboard bios supports and you must selecte PCI-Express Generation 2 (Gen2) as default for all PCI-E slots. Motherboards with only Generation 1 PCI-E may or may not work depending on the video card manufacturer.  If you have setup Generation 2 PC-E then make sure all risers are not damaged at all, check the 1x PCI-E connector from all your risers as well. Make sure all your components are powered on correctly and that your PSU has enough power on the PCI-E rail for all the connected componenets.

Read more...


All you need is a wallet for the coin you are trying to mine and some basic understanding of how it works. If you do not have a wallet, we would recommend to make an account on Poloniex for a wide selection.

Once you already have an account with us you have to start by burning the img file on your hdd, file that you can download from the download section in your dashboard. After this step proceed booting the rig and register it to the platform by using the license key shown on your rig screen. Once you completed this step you can go ahead and define the pools and assign them to your rig which will instruct it  to start mining. 

Read more...


We will be posting all future updates on our Facebook page and our Blog. Also be sure to check our Youtube Channel for video tutorials and more complex details and setups.

Read more...


This is the revision number of a certain component, specifically video cards have different revision numbers when they are produced and thus some small settings may differ from one rev to another and small performance differences. Although some of these revisions have differences between them, it will not be a huge impact on the component performance.

Read more...